AUTOMATIC GATES SITE MAP DO IT YOURSELF HELP PAGES WARRANTY INFORMATION HOME CONTACT US ORDER FORM BUSINESS OPPORTUNITIES WESTERN AUSTRALIA VICTORIA TASMANIA SOUTH AUSTRALIA QUEENSLAND NORTHERN TERRITORY NEW SOUTH WALES Shop Online

Full Tank Swing Automatic Gate Operator

The Full Tank is one of the biggest automatic gate opener in our range. It is a hydraulic operator designed for high duty cycle commercial, industrial and residential electric driveway gates up to seven metres wide.

OTHER PAGES OF INTEREST IN THIS CATEGORY
ASA6   ASA7 LOGIC CONTROLS  ELECTRIC GATE LOCKS

240 VOLT HYDRAULIC GATE OPERATOR - COMMERCIAL / INDUSTRIAL - 7.0 METRE LEAF

Manufactured by SEA in Italy the Full Tank is a 240 volt swing gate hydraulic operator. The use of hydraulics in swing gate motors has been around for many years with the motor, tank and pump all contained within the housing. As with all things hydraulic gate operators come in various levels of quality but given that hydraulics are essentially designed for demanding sites our attitude is that they need to be the best and no corners should be cut. To this end SEA is recognised as being in the top two manufacturers in the world of hydraulic gate motors and maintains high levels of quality by producing all vital components in house. Low side room is a feature of this operator needing as little as 100mm. The FULLTANK is a non reversible operator with key operated manual override. The FULLTANK is suitable for gates to 7 metres wide and likes nothing better than a high duty cycle.

It is possible to use a variety of control boards to control the FULLTANK including the ATA CB6, DG240 and the T2. The suggested board is the LOGICSEADG240 which has thrust control to regulate the FULLTANK force and can be used as a one or two motor controller.

Photocells -

A must have if you use automatic closing function is photocells. Photocells provide an extra level of safety to prevent gates from closing on vehicles or pedestrians. Sliding gates can have a single set between the gate posts or multiple sets if desired at various heights. More information and a full list of product here. With this sort of automation be sure to choose a qaulity photocell with filters like the BEAMFLIP or BEAMFLIPBATT and install using screened cable.

Mains Power Filter -

Gate automation like this usually is installed on commercial and industrial sites where you can be pretty certain the mains power is less than desirable. Dirty power can result in lack of reliability and increased service costs. Installing a good quality filter will not only guard against spikes and surges but clean up the power before it reaches your electronics. There is more information here.

Electric gate lock -

There is varied debate about when an automatic gate should have the extra security of an electric gate lock. The lock increases security and also protects your gate operating system. It operates automatically when you choose to open your gate. Check them out here.

HOME  -   SHOP ONLINE -  WARRANTY -  DIY - CONTACT

NSW| NT| QLD| SA| TAS| VIC| WA